MASSEY FERGUSON 5465 5400 T2

Models

Models te30
Horsepower 130 to 170

INCLUDES

  • Coupling
  • Arms
  • Hydraulic installation (Electrovalve, Manifold and Tractor Controls)
  • All operational components (Cylinders, Hoses, Connectors, etc.)
  • DRB System (flat sides)

NOT INCLUDED

  • Buckets
  • Forks
Mod A B C D E F G H I J K
te30 4301 4065 3447 1970 62º 74º 57º 214 2858 Kgs 2133 Kgs 1755 Kgs
Leyenda de las medidas de la pala

NOTE: The measurements given may vary depending on tractor model / type.

Measurements have been taken for a working pressure of 190 BAR and a weight on the pallet fork.

  • I Tear-out force
  • J Payload
  • K At maximum height

Specifications

DPR System

Rapid loader uncoupling

Close-up photo of the loader uncoupling part

The ease with which the loader is coupled comes from the DRP System®, a new coupling system that is both safer and quicker.

DR2B System / DR4B System

Rapid nozzle plug (flat faces)

Close-up photo of the rapid nozzle plug

This enables the hydraulic and electric connectors to be instantly connected or disconnected by just raising or lowering the lever, with no oil-loss.

Safety valve

Close-up photo of the loader safety valve

Regulates the pressure in the ram pistons where there is any mechanical contact, preventing possible breakages.

DRC System

Rapid bucket uncoupling

Close-up photo of the bucket uncoupling part

It only takes a few seconds to couple or uncouple any implements.

Self-greasing shaft sleeves

Close-up photo of self-greasing shaft sleeves

All the joints in the loader have self-greasing sleeves and treated galvanized bolts to achieve a good fit in each of them.

Internal parallelogram system

Close-up photo of the workings of the internal parallelogram system

The internal parallelogram system improves the side view from the tractor cab and implement self-levelling.

Options

  • Hydraulic Damping
  • Crossgate
  • Third function
  • Colours

AH System ©

Hydraulic Damping

This system provides added convenience by removing all the water hammer produced when driving.

MS System ©

Crossgate cable

Operated using a crossgate, with the possibility of two simultaneous movements.

Third function

Third function for the operation of hydraulic implements.

Paint finish in different colours.

Optionally, the loader can be personalized by painting it with the colour of the tractor.